The DQ Metro Towel Radiator is a lovely ladder towel rail  It is available in a great selection colours and Special Finishes so you can tone it in with your decor making The DQ Metro a fantastic addition to any bathroom, cloakroom or kitchen. 

Industry standard straight fronted ladder rail, the tried and tested Metro with 25mm tubes, is available in a large selection of sizes to suit most applications. The Metro is available in both central heating and electric. The electric option comes with a standard element and factory pre-fill of inhibitor heat transfer liquid.

The Metro is available in 5 different height choices and a range of widths to suit everybody's requirements and with a massive range of finishes , this really is a piece not to be missed.

• Available in White, Chrome, RAL Colours & Special Finishes
• Available in Mild Steel
• Guaranteed by DQ for 5 years
• Delivery: White/Chrome 1/2 working days
• Delivery: RAL Colours & Finishes 5/7 working days
• Fuel options: Central Heating, Electric, and Dual Fuel
• Heating Output: Delta T50 

Additional Extras for hanging towels or robes , the following are great accessories to fit The DQ Metro, Please Follow 

https://www.greatrads.co.uk/collections/radiator-valves/products/dq-grip-peg

 https://www.greatrads.co.uk/products/dq-metro-towel-bar?variant=32663472013378

Special Finishes include RAL Colours please see chart in link below:

please place your order under the finish category you require and from there you will be contacted via email to confirm your colour & finish with the DQ RAL colour chart.

https://dqheating.com/finishes/

To convert this item into Electric or Dual Fuel please divide the wattage of your chosen size by 1.81 this will produce the wattage of the element you require and then select a conversion kit below: please only purchase the size of element needed and not higher for safety reasons

For electric only , please follow

Thermo :

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit-1

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit

For Dual Fuel , please follow 

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/standard-electric-duel-fuel-conversion-kit

Thermo:

https://www.greatrads.co.uk/collections/radiator-valves/products/thermostatic-duel-fuel-conversion-kit

 Please note:  only purchase the size of element needed and not higher for safety reasons - Valves will need to also be purchased depending on where your pipes come from.

Valves

(please note valves are required for dual fuel conversions and central heating only)  

https://www.greatrads.co.uk/collections/radiator-valves  

Pipework coming from floor - Straight Valves

Pipework coming from wall- Corner/Angled Valves

Sleeving Kits / Pipe Covers

Finish off the look with our sleeving kits, making your pipework look fresh and matching your shiny new valves, Please follow

https://www.greatrads.co.uk/collections/radiator-valves/products/130mm-and-300mm-sleeving-kit-various-colours

If this item is out of stock at the time of purchase you will be contacted via email.

**Radiator is supplied with brackets, blanking plugs, airvents, fixing screws, rawl plugs, airvent key and 1/2" connectors** 

Sizing & Heating Outputs 

DQ Metro Towel Radiator 

Click here for DQ Metro Fitting Instructions

TECHNICAL INFORMATION

The DQ Modus 5 Column Radiator has a timeless design, taken from its cast iron forefathers it has all the style of a cast radiator with the benefits of steel. This is a Made to order piece, each section is 46mm width. Please see below to workout your sizes.

The DQ Modus can be used for both modern and period style applications, coupled with a vast array of sizes and fixings available, the Modus is one of the most versatile radiators on the market. It comes in a range of finishes including White, RAL Colours & Special Finishes.

The Modus can also be manufactured as a curved or angled radiator, ideal for bay windows etc. Please contact our sales office hello@greatrads.co,uk for pricing and assistance.

• Made from Mild Steel
• Guaranteed by DQ for 5 years
• Delivery: Made to Order in 4/6 Weeks
• Fuel Option: Central Heating
• Measured Δt 50°C
• Available in 2, 3, 4 & 6 Column
• Available in White, RAL Colours & Special Finishes

Special Finishes include RAL Colours please see chart in link below:

https://dqheating.com/collections/column-radiators/modus/

 If you require a RAL colour please place your order under RAL Colour and from here you will be contacted via email to confirm your colour with the DQ RAL colour chart.

To view the full Modus Range , Please Follow

https://www.greatrads.co.uk/pages/search-results-page?q=dq+modus

Additional Extras

for feet please follow 

https://www.greatrads.co.uk/collections/radiator-valves/products/dq-modus-brackets 

MODUS CAST FEET , MODUS WELDED FEET & MODUS SLIP ON FEET

WHITE or RAL/FINISHES Please Follow

https://www.greatrads.co.uk/products/dq-modus-brackets

Valves

https://www.greatrads.co.uk/collections/radiator-valves  

Pipework coming from floor - Angled Valves

Pipework coming from wall- Corner Valves

Sleeving Kits / Pipe Covers 

Finish off the look with our sleeving kits, making your pipework look fresh and matching your shiny new valves, Please follow

https://www.greatrads.co.uk/collections/radiator-valves/products/130mm-and-300mm-sleeving-kit-various-colours

Specifying your Modus Radiator:

1. Choose column depth.
2. Choose height (H).
3. Calculate number of sections – to do this, take the Btu output of chosen section and height from spec table then divide your required output by this number.
4. Choose fixings.
5. Specify if different from standard 1/2" bottom opposite end connections in RAL 9010 (white)

e.g. you require a Modus with an output of 6000 Btu to heat your room

1. You have chosen your column depth of 4 columns.
2. Chosen your height of 500mm.
3. Calculated your required number of sections (4.500 = 247 Btu, 6000 / 247 = 25 sections).
4. Decided on wall brackets.
5. With 1/2" bottom opposite end connections as standard in RAL 9010 (white).

So, to meet your requirements you would need to order:
Modus 4.500 x 25 sections in RAL 9010 (white) with wall brackets 1/2" bottom opposite end connections.

Output will be 6175 Btu (25 sections x 247 Btu)

Length will be 1174mm (25 sections x 46mm per section + 24mm for reducing bushes).

TECHNICAL INFORMATION

DQ Modus 5 Column Radiator

The DQ Modus 6 Column Radiator has a timeless design, taken from its cast iron forefathers it has all the style of a cast radiator with the benefits of steel. This is a Made to order piece, each section is 46mm width. Please see below to workout your sizes.

The DQ Modus can be used for both modern and period style applications, coupled with a vast array of sizes and fixings available, the Modus is one of the most versatile radiators on the market. It comes in a range of finishes including White, RAL Colours & Special Finishes.

The Modus can also be manufactured as a curved or angled radiator, ideal for bay windows etc. Please contact our sales office hello@greatrads.co,uk for pricing and assistance.

• Made from Mild Steel
• Guaranteed by DQ for 5 years
• Delivery: Made to Order in 4/6 Weeks
• Fuel Option: Central Heating
• Wall brackets are included in the price as standard
• Measured Δt 50°C
• Available in 2, 3, 4 & 5 Column
• Available in White, RAL Colours & Special Finishes

Special Finishes include RAL Colours please see chart in link below:

https://dqheating.com/collections/column-radiators/modus/

 If you require a RAL colour please place your order under RAL Colour and from here you will be contacted via email to confirm your colour with the DQ RAL colour chart.

To view the full Modus Range , Please Follow

https://www.greatrads.co.uk/pages/search-results-page?q=dq+modus

Additional Extras

for feet please follow 

https://www.greatrads.co.uk/collections/radiator-valves/products/dq-modus-brackets 

MODUS CAST FEET , MODUS WELDED FEET & MODUS SLIP ON FEET

WHITE or RAL/FINISHES Please Follow

https://www.greatrads.co.uk/products/dq-modus-brackets

Valves

https://www.greatrads.co.uk/collections/radiator-valves  

Pipework coming from floor - Angled Valves

Pipework coming from wall- Corner Valves

Sleeving Kits / Pipe Covers 

Finish off the look with our sleeving kits, making your pipework look fresh and matching your shiny new valves, Please follow

https://www.greatrads.co.uk/collections/radiator-valves/products/130mm-and-300mm-sleeving-kit-various-colours

Specifying your Modus Radiator:

1. Choose column depth.
2. Choose height (H).
3. Calculate number of sections – to do this, take the Btu output of chosen section and height from spec table then divide your required output by this number.
4. Choose fixings.
5. Specify if different from standard 1/2" bottom opposite end connections in RAL 9010 (white)

e.g. you require a Modus with an output of 6000 Btu to heat your room

1. You have chosen your column depth of 4 columns.
2. Chosen your height of 500mm.
3. Calculated your required number of sections (4.500 = 247 Btu, 6000 / 247 = 25 sections).
4. Decided on wall brackets.
5. With 1/2" bottom opposite end connections as standard in RAL 9010 (white).

So, to meet your requirements you would need to order:
Modus 4.500 x 25 sections in RAL 9010 (white) with wall brackets 1/2" bottom opposite end connections.

Output will be 6175 Btu (25 sections x 247 Btu)

Length will be 1174mm (25 sections x 46mm per section + 24mm for reducing bushes).

DQ Modus 6 Column Radiator 

TECHNICAL INFORMATION

The Colona Horizontal is traditional in design, and would really look the part with matching traditional valves, making for a delightful radiator.

The Reina Colona has a number of options with column depths (2, 3 & 4) for greater heating output. The columns fit behind the first set. Just select from the options the one you require.

It is also available in a vertical option click  on  https://www.greatrads.co.uk/products/reina-colona-vertical-designer-column-radiator

There are optional Slip on feet available. Please click here 

https://www.greatrads.co.uk/products/reina-colona-optional-insertable-feet

• The Colona is available with a variety of column depths, meaning there are extra sets of identical piping behind the first for rooms which require greater heating output
• All Reina products are tested @ Delta T-70 to convert this to Delta T-50 please divide the BTU by 1.54
• Finished in a classical white and RAL Colours
• White is yours in only 1-2 working days if ordered before 12pm - The RAL Colours are 15 working days
• 5 year guarantee
• Fuel Options : Central Heating, Dual Fuel, Electric

If you require a RAL colour please place your order under RAL Colour and from here you will be contacted via email to confirm your colour with the Reina RAL colour chart.

http://www.reinadesign.co.uk/ral-and-special-colours/

To convert this item into Electric or Dual Fuel please divide the wattage of your chosen size by 1.81 this will produce the wattage of the element you require and then select a conversion kit below:

For electric only , please follow

Thermo :

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit-1

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit

For Dual Fuel , please follow

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/standard-electric-duel-fuel-conversion-kit

Thermo:

https://www.greatrads.co.uk/collections/radiator-valves/products/thermostatic-duel-fuel-conversion-kit

Click here for our full range of Radiator Valves

(please note valves are required for dual fuel conversions and central heating only)

Valves  

https://www.greatrads.co.uk/collections/radiator-valves  

Pipework coming from floor - Angled Valves

Pipework coming from wall- Corner Valves

**Radiator is supplied with brackets, blanking plugs, airvents, fixing screws, rawl plugs, airvent key and 1/2" connectors**

If this item is out of stock at the time of purchase you will be contacted via email.

Sizing & Heating Outputs

Reina Colona Horizontal Column Radiator 

 The Reina Nevah Horizontal Designer Radiator is a creative and stunning design. It has luxurious bars running horizontally that give it a stand-out look.

This mild steel  radiator is a perfect touch to any room in your home. It is a variation on the super popular Reina Neva, which is a best selling design 

It offers a fantastic range of height & widths along with various BTU outputs. The Nevah is available in smaller heights of 295mm, so is perfect for conservatories, or running underneath windows. It is also available in a more standard 590mm height - so has bags of versatility. With Double or Single panel you really do have lots of choice with this one.

• Made from Mild Steel
• 5 Year Guarantee
• All Reina products are tested @ Delta T-70 to convert this to Delta T-50 please divide the BTU by 1.54
• Available in White, Anthracite and RAL  colours 
• 1/2 Working Day Delivery if ordered before 12pm (RAL special colours with delivery of approximately 15 Working Days)
• Fuel Options : Central Heating, Dual Fuel or Electric (on selected sizes, please see technical info below))

**Radiator is supplied with brackets, blanking plugs, airvents, fixing screws, rawl plugs, airvent key and 1/2" connectors**

Sizing & Heating Output

Reina Nevah Horizontal Designer Radiator

Installation Guide

http://www.reinadesign.co.uk/wp-content/uploads/2020/02/nevah.pdf

• Made from mild steel.
• Double layer of pipes for a higher BTU output available 
• All Reina products are tested @ Delta T-70 to convert this to Delta T-50 please divide the BTU by 1.54
• Underneath Flow and Return
• Delivery up to 15 working days for RAL Colours.
• Delivery 1-2 working days for White models.
• 5 Year Guarantee.
• Fuel Options are Central Heating, Dual Fuel or Electric
  

To convert this item into Electric or Dual Fuel please divide the wattage of your chosen size by 1.81 this will produce the wattage of the element you require and then select a conversion kit below:

For electric only , please follow

Thermo :

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit-1

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit

For Dual Fuel , please follow

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/standard-electric-duel-fuel-conversion-kit

Thermo:

https://www.greatrads.co.uk/collections/radiator-valves/products/thermostatic-duel-fuel-conversion-kit

• If you require a RAL colour please place your order under RAL Colour and from here you will be contacted via email to confirm your colour with the Reina RAL colour chart. 

http://www.reinadesign.co.uk/ral-and-special-colours/

Click here for our full range of Radiator Valves

(please note valves are required for dual fuel conversions and central heating only)

Valves  

https://www.greatrads.co.uk/collections/radiator-valves  

Pipework coming from floor - Straight Valves

Pipework coming from wall- Angled/Corner Valves

If this item is out of stock at the time of purchase you will be contacted via email.

**Radiator is supplied with brackets, blanking plugs, airvents, fixing screws, rawl plugs, airvent key and 1/2" connectors**