The Cornel 4 Column Horizontal Radiator is your modern column radiator replicating the cast  styles of old. The design enables it to be used in both modern and traditional settings. Typically seen in Old Schools and Churches. 

 There is also the option for a Vertical in the Cornel Range so you can keep a uniformed look throughout the property with this design if so required. The Full Cornel Range in the 2 column option comes in 4 heights and 7 widths , The 3 column option in 5 heights and 10 widths & The 4 column in 4 heights and 9 widths. The vertical option is only available in 2 or 3 columns, Each of them pushing out a substantial amount of heat making The Cornel one of UK's highest output steel Multi column radiator

 The Cornel would look perfect in any room in your home from the kitchen & bathroom to the bedrooms or cloakrooms. Their old, traditional style stand out and really are a talking point when fitted in an entrance or reception area.

• Italian Design & Manufacturer, certified to EN442
• Wall Brackets as standard; optional Stud Wall available
• Optional Floor Mounts; Slip on Feet & Cast Feet (floor mounts)
• Also available in Vertical
• RAL 9016 White as standard plus 25 RAL colours & 6 special finishes 
• Standard White available in 48-72 hours, colours 15 working days
• Guaranteed by Supplies 4 Heat for 10 years
• Output ∆t 50ºc
• Fuel Type , Central Heating, Dual Fuel or Electric 

To view the 2 & 3 Column Horizontals , Please Follow

 https://www.greatrads.co.uk/pages/search-results-page?q=cornel

Supplies 4 Heat have some additional extras and accessories for the Cornel Range. There are optional floor mounts, 

 (adds 105mm to overall height)

slip on feet and Stud Wall Brackets available for the Cornell.

(adds 100mm to overall height)

Additional Towel Bars are also available in The Cornel Range

For Special Finishes & RAL Colours please see the S4H chart in link below:

https://www.supplies4heat.co.uk/files/1815/7053/0729/COLOURS.pdf

 If you require a RAL Colour, please place your order under RAL Colour and from here you will be contacted via email to confirm your finish with the Supplies 4 Heat RAL colour chart. The same procedure applies for the special finishes, if you require a special finish , please pick this option from the dropdown menu.

Valves

https://www.greatrads.co.uk/collections/radiator-valves  

Pipework coming from floor - Angled Valves

Pipework coming from wall- Corner Valves

Sleeving Kits / Pipe Covers 

Finish off the look with our sleeving kits, making your pipework look fresh and matching your shiny new valves, Please follow

https://www.greatrads.co.uk/collections/radiator-valves/products/130mm-and-300mm-sleeving-kit-various-colours

To convert this item into Electric or Dual Fuel please divide the wattage of your chosen size by 1.81 this will produce the wattage of the element you require and then select a conversion kit below:

For electric only , please follow

Thermo :

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit-1

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit

For Dual Fuel , please follow

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/standard-electric-duel-fuel-conversion-kit

Thermo:

https://www.greatrads.co.uk/collections/radiator-valves/products/thermostatic-duel-fuel-conversion-kit

For central heating, all you need to do it connect it to your existing or new boiler system via a Valve. For electric you would need a electric heating element and then connect to a fused spur,

and for Dual Fuel you would need to connect it to the system via a valve, a electric element and a t piece connector.

Sizing & Heating Outputs

Pipe centres left to right = Width of radiator plus valves

Pipe centres from wall =

2 column = 64mm - 74mm 

3 column = 82mm - 92mm 

4 column = 102mm - 112mm

please see the chart in the image section

Click here for Supplies 4 Heat Cornel Fitting Instructions