The Supplies 4 Heat Cornel Bare Metal Lacquer, Horizontal 3 & 4 Column Radiator is a Stunning Piece. It is your modern column radiator replicating the cast styles of old. The design enables it to be used in both modern and traditional settings. Typically seen in Old Schools and Churches, It can be used in any room in the house. With this polished Industrial Finish and its great heat outputs this a piece not to be missed.

There is also the option for Vertical sizes so you can keep a uniformed look throughout the property with this design if so required. This Bare Metal Lacquer Range is available in 4 heights an up to 11 widths. The horizontal version is built in either 3 or 4 columns, The Vertical gives you an option of 2 or 3 columns ,each of them pushing out a substantial amount of heat, making The Cornel one of the UK's highest output steel Multi column radiators

 This style of radiator looks good in the kitchen & bathroom to the bedrooms or cloakrooms. Their old, traditional style stand out with the stunning Bare Metal Lacquered Finish , definitely a talking point when fitted in an entrance or reception area. 

• Italian Design & Manufacturer, certified to EN442
• Stunning Bare Metal Lacquer Finish
• Wall Brackets as standard; optional Stud Wall available
• Optional Floor Mounts; Slip on Feet & Cast Feet (floor mounts)
• Also available in Vertical 
• Delivery - Delivered within 48-72 hours if ordered before 12pm
• Guaranteed by Supplies 4 Heat for 10 years
• Output ∆t 50ºc
• Fuel Type , Central Heating or Dual Fuel 

 To view the matching Vertical Range & Additional Extras, Please Follow

https://www.greatrads.co.uk/pages/search-results-page?q=cornel

slip on feet and Stud Wall Brackets available for the Cornell.

(adds 100mm onto your overall height)

Valves

https://www.greatrads.co.uk/collections/radiator-valves  

Pipework coming from floor - Angled Valves

Pipework coming from wall- Corner Valves

Sleeving Kits / Pipe Covers 

Finish off the look with our sleeving kits, making your pipework look fresh and matching your shiny new valves, Please follow

https://www.greatrads.co.uk/collections/radiator-valves/products/130mm-and-300mm-sleeving-kit-various-colours

To convert this item into Electric or Dual Fuel please divide the wattage of your chosen size by 1.81 this will produce the wattage of the element you require and then select a conversion kit below:

For electric only , please follow

Thermo :

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit-1

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/electric-only-conversion-kit

For Dual Fuel , please follow

Standard:

https://www.greatrads.co.uk/collections/radiator-valves/products/standard-electric-duel-fuel-conversion-kit

Thermo:

https://www.greatrads.co.uk/collections/radiator-valves/products/thermostatic-duel-fuel-conversion-kit

For central heating, all you need to do it connect it to your existing or new boiler system via a Valve. For electric you would need a electric heating element and then connect to a fused spur,

and for Dual Fuel you would need to connect it to the system via a valve, a electric element and a t piece connector.

 Please note:  only purchase the size of element needed and not higher for safety reasons - Valves will need to also be purchased depending on where your pipes come from.

Sizing & Heating Outputs

Pipe centres left to right  = Width of radiator plus valves Pipe centres from wall

 2 column = 56mm,

3 column = 74mm,

4 column = 93mm

please see the chart in the image section

Supplies 4 Heat Cornel Vertical Column Radiator